Programmable ECU's (Was GM TPI tips for a newbie)

andy quaas realsquash at yahoo.com
Thu Jan 14 12:14:31 GMT 1999


The holley DIGITAL systems are great.  Don't touch the analog ones.

Andy


---Charles Brooks <cbrooks1 at mail.tqci.net> wrote:
>
> I've looked at several of them but frankly I'm not sure what
> I should be looking for in a programmable EFI system. The
> Accell DFI system seems popular and so do the Haltech
> products. I must have looked at a dozen Mfr.'s. I was leaning
> toward the Holley system but after receiving several messages
> on the problems and deficiencies they have I changed my mind.
> Which system(s) is/are considered the best?
> 
> Charles
> 
> 
> 
> David Sagers wrote:
> > 
> > In putting a TPI on a 406 the factory settings work just fine
> > with the 28 lbs injectors, but a built motor is very different
> > than a stock motor.
> > 
> > For a stock 406 28 lb injectors are all that's needed.  If
> > it's built the perhaps a 30 lb.  Also consider finding a
> > programable system so that you can dial in the fuel & ignition
> > curves to match your cam, headers, etc...  I would look for a
> > computer that can be programmed from a lap top while you drive.
> >  Other members can tell you how to burn new chips.  It's your
> > choice.
> 

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com




More information about the Diy_efi mailing list