HALP dribbling Thanks everyone

[Greg Hermann]

>Peter Fenske wrote:
>
>> You guys did get me thinking. In order to idle
>> properly with the lean mixture required a much
>> higher airflow is required. this tends to activate the
>> main booster, hence the dribbling.
>> Also the low vapor pressure used here in winter
>> is a contributation.
>>
>> What we are gonna try and the CO meter likes it
>> is creating a massive air leak. HC goes up
>> but should be tolerable.
>
>You might try openning the secondaries just a tad until you pass.....  Tom

And setting the float level a bit lower than specified will delay the
beginning of the dribble also!

Greg