DFI, Batch Fire, and other myths

[Ward Spoonemore]

Tom
Your Edelbrock ProFlo is typical on several other EFI system's
actualy the tests I have run show little on no differace between L/R and
other systems.
In fact all EFI are on almost 100% at or near WOT.
Ward


-----Original Message-----
From: owner-diy_efi at efi332.eng.ohio-state.edu
[mailto:owner-diy_efi at efi332.eng.ohio-state.edu]On Behalf Of Tom Sharpe
Sent: Wednesday, January 20, 1999 5:59 PM
To: diy_efi at efi332.eng.ohio-state.edu
Subject: Re: DFI, Batch Fire, and other myths




Ken Kelly wrote:

> This only makes sense if the injectors are fired as left
> bank and right bank. I would think you would gain more
> benefit by grouping them in firing order rather than by
> bank.

My ProFlow fires 4 sets of 2 injectors 1-8, 4-3, 6-5, 7-2. foue
circuits/timers/drivers, one O2 sensor.   Tom