TPI on a 406

[Ludis Langens]

"Bruce Plecan" <nacelp at bright.net>
> I'd check the pinout real close, the 6870, and 165 both have two
> connector ecms, and maybe someone threw the 165 inna pile,
> thinking it was the same thing.  I don't know if there is a 
> difference in pinouts, but if the harness doesn't match the
> pinout for a 165 then that's you answer, there is a 165 pinout
> at 332 FTP.

The pinouts are subtly different.  From memory, A11 & B11 are analog
inputs (MAT, etc.) in one and grounds in the other.  Also, one of the
EST signals is moved.  The '165 is closer to the pinout of a '747.  Why
couldn't GM be consistent?

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/