DFI, Batch Fire, and other myths

[Mike Brown]

Bruce,
	Haven't had enough time to tell yet.  Only started burning ROMs over
the Christmas holidays.  Been raining arround here so I have not been
able to make as many test runs as I would have liked.  This system is in
my '34 coupe.  Not the best test bed for rainy days.... too much
cleaning afterwards.  Nothing dramatic so far though.  I didn't even
know I had this problem till I started working on the code.  I think it
will make tuning a little more consistant.  Sometimes it would run real
good.  The next time a little off and you would have to correct for it.
Then the next time it was a little off the other way and you would have
to move the mixture back to where it was before.  Time will tell....
mike




Bruce Plecan wrote:
> 
> -----Original Message-----
> From: Mike Brown <mikebr at sr.hp.com>
> To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
> Date: Thursday, January 21, 1999 9:30 AM
> Subject: Re: DFI, Batch Fire, and other myths
> 
> Did this make a noticeable difference, finding and curing this bug?.
> Bruce
> 
> >I have reverse engineered the hardware and firmware on this system and
> >have corrected this bug.  If anybody out there has an Edelbrock ProFlow
> >and is interested in working together to improve it let me know as I
> >have functional schematics and documented source code (the code is full
> >of bugs I might add).  Been working steadily on this for over 7 months.
> >
> >Mike
> >