SUN Scope

[Don.F.Broadus at ucm.com]

Thanks for the lead, I will follow up on the Snap on connection. I didn't
know that Sun was connected to Snap- On
 
Don

> -----Original Message-----
> From:	Programmer [SMTP:nwester at eidnet.org]
> Sent:	Wednesday, June 02, 1999 10:15 PM
> To:	diy_efi at efi332.eng.ohio-state.edu
> Subject:	Re: SUN Scope
> 
> Don,
> 
> Try SnapOn / Sun division--or check their webpages for info. They usually
> have repair depots (Equiserve) that end up doing the actual repairs on
> older
> equipment. Hope this helps...
> 
> --Original Message-----
> From: Don.F.Broadus at ucm.com <Don.F.Broadus at ucm.com>
> To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
> Date: Wednesday, June 02, 1999 11:17 AM
> Subject: SUN Scope
> 
> 
> >I was given a SUN  820 engine tester with a model SS-80 scope. I plan to
> use
> >the scope with a SUN 404 distributor machine to spin
> >an HEI and  bench test a 747.  The SS-80 has a bad power transformer
> >(shorted primary) does any one have schematics or repair
> >manuals for SUN automotive test equipment. The SS-80 has a limit of 40KV
> but
> >I figure a simple voltage divider will extend that.
> >
> >Thanks for any help
> >
> >Don
> >