Will Chevy Mount to GMTH425 Toronado/Eldorado Transaxle?

[Jim Davies]

On Tue, 15 Jun 1999, Shannen Durphey wrote:

> > Daring is not really a necessity. I turned out several hundred over the
> > years using nothing but a drill press etc...3/8 is a bit thick, try 1/4
> > inch.
> And you always made sure the pilot on the torque converter was
> supported by the crankshaft or a bushing. : )

In my experience, the problem was usually at the trans pump end. The
common fix was a flat washer between the converter and drive plate for 
each converter to drive plate bolt