Todd's sure fire blower sale - Fred, will you be using the same

[Todd....!!]

Just got your E,

Will do.

I know I've said this before, but will post info assoon as I get it...

Buddy's not cooperatin,he's afraid I'll make a quicker blown B-engined
B-body than he....

Later....

Todd....

---------------------


Frederic Breitwieser wrote:
> 
> > The Blower itself, right off the diesel truck or wherever they come
> > from(Will find out exactly where these come from) are $100.
> 
> Sold.
> 
> > Rebuild kits are $75.
> 
> Sold.
> 
> > 1.- The carb plate that bolts onto the 'top' of the blower(In your
> > 'case' the SIDE of the blower, but you may not need a carb plate since
> > you won't be runnin carbs, RIGHT?
> 
> Not necessary.  Easy to make one, out of 3/4" aluminum plate, and angle
> the carb hole using a dremel to promote smooth airflow.  Made these
> before.
> 
> > 2.- The intake manifold to bolt the blower to the engine, you may not
> > need this either since you doin a funky setup... right?
> 
> Nope :)
> 
> > 3.- Pulleys(1 for crank, 1 for blower.
> 
> Need.
> 
> > 4.- Front plate for pulley setup on blower.
> 
> Need.
> 
> > Sounds like you may only need the front plat efor the pulleys and maybe
> > the pulleys?  That should cover ya!!
> 
> Yep !
> 
> > Todd's Blower Service - You name it we'll blow it....
> 
> Don't say that too loud, the navy boys on the list might come rushing
> over to your house :)
> 
> > That sounds a bit faggish, must work on the motto...
> 
> Most definately. :)
> 
> > Fred, would you be plannin on gettin a good ol belly button 6-71 or go
> > all out and run the 8-71?
> 
> I'd like a 6-71 for my Buick engine, and a 8-71 for my Dodge B block.
> 
> > Not sure of the 8-71's are the even $100 as the 6-71's are, buddy said
> > the 8-71's are REALLY HUGE!! About as big as a s.b. chev!
> 
> Actually, 6-71 for both would be fine.  RPMs not that high.
> 
> Let me know when I can order them :)