4.3 TBI

[Clive Apps Techno-Logicals 416 510 0020]

> 
> I would like to convert a stock eliminator carbed 4.3 V-6 to a TBI using the 
> stock throttle body and such that is dictated by the rules.  The engine makes 
> around 250 hp.  I assume since it is TBI, I can only use 2 injectors and off 
> the top of my head I would probably use two 50lb injectors.  I would like to 
> make the fuel map based on TPS% and rpm (Alpha-N).  What recommendations does 
> the list have for DFI computer and such.  Engine specs are


too small
you would need at least 2 80lbs inj

Clive 
> 
> 250 hp
> Only 2 injectors (I think)
> 7500+ rpm
> Open loop only
> 
> Am I forgetting anything?  Any and all suggestions are welcome!
> 
> Thanks,
> 
> Chris Hill
> 
>