aluminum intake cosmetics

[Pedro Haynes]

Once i found a diagram of a sand blaster that you can build from an old
propane tank. If I am lucky enough to find it I will post the site.
    
    Pedro

----------------------------------------------------------------------------
----------------------------------------------------------------------------
------------  


>Dave,
>	You were going down the right road. Why did you quit. I've
>been traveling down that road for 30 years, and the end
>isn't in site. I however, only have to finish the siding on
>my new 5 car garage.
>
>		Ken
>
>Dave Williams wrote:
>> 
>> -> Sandblast the manifold first... which will cost you 10-20
>> -> bucks depending on the machine shop, if you don't have a
>> 
>>  For $50 or so you can buy an inexpensive siphon feed sandblaster, and
>> then you'll have it for the next project.  Of course, you'll need a
>> compressor, but you probably wanted one anyway.  Then a nice garage to
>> keep the sandblaster and compressor in... hmm, might be better to just
>> have someone else do it.
>> 
>> ==dave.williams at chaos.lrk.ar.us======================================
>> I've got a secret / I've been hiding / under my skin / | Who are you?
>> my heart is human / my blood is boiling / my brain IBM |   who, who?
>> =================================== http://home1.gte.net/42/index.htm
>>
>
>