Off Panhard bar

Pete Datcuk pdatcuk at snip.net
Fri Mar 12 00:59:16 GMT 1999


  This is true, but the side to side movement is very small.  The longer the
panhard bar, the smaller the movement.  On a 60" bar with 8" on suspension
travel (4" in either direction), you are talking around an 1/8" of lateral
movement.

Pete

> -----Original Message-----
> From: owner-diy_efi at efi332.eng.ohio-state.edu
> [mailto:owner-diy_efi at efi332.eng.ohio-state.edu]On Behalf Of Shannen
> Durphey
> Sent: Thursday, March 11, 1999 5:55 PM
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Off Panhard bar
>
>
> Too much coffee today.  I've been looking at 4 link rear axles, and
> the panhard bars.  It looks like the usual panhard bar will tend to
> push the axle to one side as it travels vertically. <snip>




More information about the Diy_efi mailing list