DIY_EFI Digest V4 #160, Eprom Emulator

[Marco Cortecchia]

>Pat,
>          I attempted to look at the link  (just curious)  and it was
dead.   You don't
>have to order eprom emulators all the way from Italy.  Many places in USA
sell them.   I
>think even Universal Cross Assemblers in Canada sells one.
>For anyone who is interested,   here are a few vendors of ROM emulators:
>
>Dataman: the Dataman S4 is a programmer and emulator:  www.dataman.com
>Grammar Engine:   Promice with trace:   www.gei.com
>EmuTec:     PromJet emulator:     www.emutec.com
>I think TechTools   (www.tech-tools.com) may also sell rom emulators
>
>Mark D'Sylva
>

Hi ,
the Eprom Emulator is only 1 part of the kit . You can buy the better
emulator in the world , but if You don't have a SoftWare ( specific for ECU
tuning ) to  use it during ECU tuning , You can't real use it .

Our SoftWare Eprom Wizard 2.0 can work with Racelogic EPROM Emulator and
with FlexROM II eprom Emulator , and with our SoftWare You can realy use
this emulator in ECU tuning work . 

You can see some informations inside our new web site :

www.3wad.com/efi/

Using our SoftWare You can made changes in Realtime , with engine turn on . 
You don't need use 2 emulators because the Racelogic have 2 memory inside
and this memory banks are swaped in automatic way every time You change 
a byte . The Racelogic have the tracing of readed address to , so You can
know every time , where the ECU work . It's a very very important features
for tuning work , because You can see what are the used maps , You can
understand the real input variables for each map , and You can see ( also
over 3D maps surface ) what are the used points during engine work  .

The Racelogic have 4Mbit memorys with 16 bit data bus , so You can work
with ALL memory used on automotive applications .


 




MARCO CORTECCHIA ( SoftWare developer )
Via Bellini 70/A
40026 - Imola ( BO ) ITALIA

Tel/Fax : +39-(0)542-681936
m.cortecchia at mail.asianet.it
www.3wad.com/efi