injector manifold design

[Stowe, Ted-SEA]

yes I wondered about that, but I was considering that since by design the
Bosch system fires all 4 injectors like a bank at a time, 2 big injectors
per port, both firing all the time, seems like it would have a lot of
overlap. I can't immediately see the value of having 4 injectors, which
would be physically hard to do with 2 intake ports, but 2 bigger ones
instead might logically work. ??

-----Original Message-----
From: Mike Morrin [mailto:mikem at southern.co.nz]
Sent: Sunday, March 21, 1999 11:25 PM
To: diy_efi at efi332.eng.ohio-state.edu
Subject: Re: injector manifold design


At 08:50 pm 21/03/99 -0800, Stowe, Ted-SEA wrote:
. outside of the irritating fact
>that my head has siamesed intake ports, could I create an intake manifold
>that mimics an injector per port, and have 2, (or one larger one), aimed at
>each mgb 'dual' intake port ? 

I think you might have trouble getting mixture balance between the
cylinders on each port, as they are not 180 degrees firing from each other,
so how would you time the injection pulses to give each cylinder its fair
share?

regards,

Mike