EFI Intake Conversion (1 of 2)

[rr]

Actually, if you saw the price, you may feel that it was necessary.
MSD sells these also, along with a bunch of other efi stuff.

BobR.


James Weiler wrote:
> 
> I made myself one of these but now realize that it was unecessary.  I
> used a 27/32 bit and had a friend with a lathe cut the tip down to 13
> mm.  Then used a grinding wheel to put a proper edge on the cutting surface.
> hope that made sense,
> jw
> 
> On Sat, 27 Mar 1999, DC Smith wrote:
> 
> > Hey Guys,
> >
> >  I saw a neat little drill bit at a Accell or something, truck at the
> > Craftsman Nationals last summer. It was a stepped injector drill bit,
> > for cutting injector holes in intakes. Can't give you any more info than
> > that I saw one and know they exist.
> >  Prolly nothing special, looked like a double ended, stepped, industrial
> > type drill bit to me. Wish I could give you more info..
> >
> > Dan
> >
> > Frederic Breitwieser wrote:
> > >
> > > > own bosses from 6061 tubing (27/32 O.D., why that size I don't know, may
> > > > be it was supossed to be 7/8).  The holes I drilled in the intake were
> > >
> > > Nope, prolly 27/32 is right for that tubing if you are
> > > talking inside diameter - that's the right hole to drill if
> > > you want to tap the tubing to 7/8, therefore that tubing was
> > > for tie rods, suspension pieces, etc.
> > >
> > > Neat little useless fact :)
> > >
> > > > I finished to inside of the boss with a 14mm ream and lots of cutting
> > > > fluid to make a smooth cut.
> > >
> > > Yeah, I ground a lot off too top and bottom.  Not exactly
> > > the way I want, but all eight injectors are the same height,
> > > so right or wrong, its consistant.
> > >
> > > --
> > > Frederic Breitwieser
> > > Bridgeport, CT 06606
> > >
> > > http://www.xephic.dynip.com
> > > 1993 Superchaged Lincoln Continental
> > > 1989 500cid Turbocharged HWMMV
> > > 1975 Dodge D200 Club Cab (soon to be twin turbo 440)
> > > 2000 Buick GTP (twin turbo V6)
> >
> > --
> > ***********************************************************************
> > Dan Smith      84 Regal   12.13 at 112     GSCA# 1459
> > St.Charles, Missouri
> > mailto:dcsmith at bytes.net
> > http://www.tetranet.net/users/morepoweral
> > ***********************************************************************
> >