Northstar VSS

Paul Tholey pxtx at erols.com
Wed Mar 31 04:56:24 GMT 1999


CM,
	okay this is where my knowledge runs out.  I am sure the rest of our
friends will correct me if I am wrong.  It sounds like the solution you are
looking for is the one that is cheap an effective.  Keeping in mind the
goal is to fool the ecm that the car is running at or above 18 mph at all
times, could the "wrong" VSS be used in this car?
	What I am imagining is...say the Caddy sees 2000 pulse per mile.  if a
4000 ppm were used, might this be a simple solution.  I speculate the
answer to be "NO" since at 30 mph the ecm would think the car was traveling
much faster, next thing you know your hitting th 112 mph fuel cutoff.

Common guys, what do you think?

Paul

At 08:20 PM 3/30/99 PST, you wrote:
>Paul,
>
>  That sounds like a great idea.  Now, how do I make a signal generator 
>to make the pulses that I need?  Or can I do it a different way?  This 
>sounds like the last bit of the puzzle that I need to get this thing 
>running great.  I would like to make a signal generator and have a 
>switch to it to shut it off and on so I can have traction or not have 
>it.  This should be possible.  How am I able to find the pulses per 
>mile?  What exactly do I need to get and do?  Thanks
>
>Chris Moore 
>
>
>>From: Paul Tholey <pxtx at erols.com>
>>Reply-To: diy_efi at esl.eng.ohio-state.edu
>>To: diy_efi at esl.eng.ohio-state.edu
>>Subject: Re: Chip for Northstar
>>Date: Mon, 29 Mar 1999 17:44:48 -0500
>>
>>
>>I thought I heard once that the Torque Mangmnt cuts out after 18 mph.  
>SO
>>if you could trick it into thinking it is always over 18 mph via the 
>VSS
>>this might be a simple solution to this problem.  Any thoughts?
>>
>>Just my 2c
>>
>>Paul Tholey
>>
>>At 04:06 AM 3/29/99 PST, you wrote:
>>>Hi,
>>>   I have a very unique car.  I have a 1987 Fiero GT with a 1995 
>>>Cadillac Northstar.  It runs great but it will not peel out.  I only 
>>>know of about 5 of these projects in the Nation and they all have this 
>>>problem.  My engine only has 16,000 miles on it. (just for you info).  
>I 
>>>think that it is the Torque Management located in the PROM.  Torque 
>>>Management was to make sure you do not peel out under a heavy load 
>>>situation.  It kills injectors and plays with the timing.  It is all 
>>>explained in the GM manual.  I had Super Chip try to make a chip for 
>me 
>>>and they said that they could take care of the problem.  It still did 
>>>not fix it.  I was wondering if you guys could help me out?  Please 
>let 
>>>me know.  Thank you.
>>>
>>>Chris Moore 
>>>ASE Master Auto Tech
>>>Get Your Private, Free Email at http://www.hotmail.com
>>>
>>
>
>Get Your Private, Free Email at http://www.hotmail.com
>




More information about the Diy_efi mailing list