Fw: DIY_EFI Digest V4 #634

[messlerproducts]

----- Original Message -----
From: messlerproducts <messlerproducts at email.msn.com>
To: DIY_EFI Digest <DIY_EFI-Digest-Owner at efi332.eng.ohio-state.edu>
Sent: Wednesday, November 10, 1999 7:09 AM
Subject: Re: DIY_EFI Digest V4 #634


> > Date: Tue, 9 Nov 1999 19:42:32 -0800
> > From: rpettibo at hpubs.com
> > Subject: Re: DIY_EFI Digest V4 #607
>
> > On another note I am just beginning to build a 440 small block and am
> > anticipating going with the Speed Pro system.  Anybody have any thoughts
> or
> > experience with this system?  To me it seems to be the most up to date
and
> > well thought out system out there especially with the wide band O2
> > capability.
>
> As a Speed Pro dealer we have sold,installed, tuned and also run many
Speed
> Pro systems on a Data Testing Systems dyno with 56 channels of data
> acquisition.  We have seen HP figures from 350 to 930.  We are currently
> doing two motors that will be over the 1000 HP mark, one being a 575 ci
> Chevy with a 1471 blower and the other being a 700 ci Donavan with a PSI
> blower.
> We would be happy to answer any questions you may have about Speed Pro
fuel
> injection.
> If not the best, it certainly sets the standard and ranks as one of the
> best.  It is definitely a tough act to follow.
> Jim,
> Messler Products Company
> http://www.messlerproducts.com
>
>
>