DIY_EFI Digest V4 #606

[dzorde at erggroup.com]

>Yes, absolutely.  From a fabrication standpoint pretend the holley TPI
>is a carbeurator, make a plenum box above it, attach turbo hoses, and
>crank away.  Might need a blow-off valve to relieve pressure if you are
>at WOT and let off the gas suddenly, but that need would be on any
>system.

You'll also need to reference the fuel pressure regulator to boost, unless its
very little boost and the injectors can make up for the increase in ambient air
pressure.

Dan  dzorde at erggroup.com