Throttle plates for individual throttle injection

[Rich Mauruschat]

-----Original Message-----
From: DIY_EFI Digest <DIY_EFI-Digest-Owner at efi332.eng.ohio-state.edu>
To: DIY_EFI-Digest at efi332.eng.ohio-state.edu
<DIY_EFI-Digest at efi332.eng.ohio-state.edu>
Date: 31 August 1999 11:20
Subject: DIY_EFI Digest V4 #497


OK Jon, I take your point - you don't want to be messing with carbs at that
sort of price!!
Here in the UK you can get a pair of rough carbs for next to nothing, 40mm
usually though.
Rich


>Date: Mon, 30 Aug 1999 17:49:21 -0700 (PDT)
>From: "Jon V." <jon at valesh.com>
>Subject: Re: Throttle plates for individual throttle injection
>
>If I could find a "cheap" set of Del'orto carbs and manifold, the last
>thing I would do is hack into them! Where I come from, a USED set of
>45MM  Del'ortos (the size recommended for this engine) with the right
>manifold for my engine cost over $900 US, Used and NOT rebuilt... Now,
>I'll admit that I didn't do MUCH looking, but I've got one company that
>would LOVE to sell me a pair of 45MM Del'ortos with manifold... for $1400
>US!
>
>So, either I want your bank account or I want your source for carbs...
>'cause AFAIK I could buy a whole damn car for the price of a set of those
>"cheap" carbs that you are talkin' about.
>- -Jon