Hello Everyone

[JN]

Bruce,
IDE header?  What do I need this for?  I can't just leave the ZIF socket in
the MEMcal?

Jason
----- Original Message -----
From: "Bruce Plecan" <nacelp at bright.net>
To: <diy_efi at diy-efi.org>
Sent: Thursday, August 10, 2000 9:47 AM
Subject: Re: Hello Everyone


> I don't have the URL handy, but get a Digi-Key catalog.  They have all
kinds
> of must have items.
> The ZIFs "Generally" need to be the long pigtail version to work in a 165
> with the mid case access door they are a little bit of a pain to work
with.
> I have a 165 minus case that I use when doing 165 work, since I screwed up
> the ZIF mounting not paying attention  to the case, the 730 was a no
> brainer.
> BTW, you'll want and IDE header, so that when you have the perfect chip,
> then you can use that to write a finished memcal.
> Grumpy
>
>
> > New member here.  Well actually I joined quite some time ago to learn
how
> to
> > tune my 89 Corvette by editing my prom software.  I quickly learned that
> > this was not the place to start and that I needed to do alot of research
> and
> > reading.  I am familiar with the GM engine management system in my car
and
> > how it works.  I now have software (GMEPRO I wanted a DOS based program)
> for
> > customizing my own prom.  After getting familiar with the tables you can
> > edit with the GM Epro, I am now ready to buy the programmer and erazor.
I
> > do however have some easy questions for the experts out there.  What I
> would
> > like to do is modify my extra calpak by removing the EPROM and replacing
> > with a ZIF socket.  This seems to me to the easiest way to swap chips.
> That
> > way I can buy 10 or so 27C128 chips with out having to erase one at a
> time.
> >
> > What adapter part number do I need?
> >
> > Thanks
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org