Throttle butterfly source?

[Bob Wooten]

If all you are talking about is the butterfly & the shaft, I would also
think that any machine shop could make a small flat spot on a shaft to put
a butterfly.

BW


> [Original Message]
> From: Eric Aos <eoa at spartek.com>
> To: <diy_efi at diy-efi.org>
> Date: 12/2/00 6:13:49 AM
> Subject: RE: Throttle butterfly source?
>
> Kinsler, Hilborn, Enderle all sell various sizes.
> Check out some of the others listed here too...
> 
> http://roadsters.com/engines.html#FuelInjection
> 
> 
> Eric Aos
> 
> > -----Original Message-----
> > From: Daniel Houlton [mailto:houlster at inficad.com]
> > Sent: Friday, December 01, 2000 9:25 PM
> > To: EFI
> > Subject: Throttle butterfly source?
> > 
> > 
> > A while back, someone was looking for a source of small
> > throttle bodies.  Anybody know where I could find just
> > the butterly and shaft it pivots on?
> > 
> > Specifically I'm looking for a butterfly 1.5" in diameter.
> > One a little smaller will do, but not less than an inch 
> > or 1.25" depending on what I find.
> > 
> > I'd prefer a new source (I'll need several eventually), 
> > not a junkyard piece stripped from a throttle body.  Can
> > these be bought seperate from a throttle body?  Any idea
> > where to look (other than the parts store)?
> > 
> > thanks
> > --Dan
> > 
> > --------------------------------------------------------------
> > --------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> > (without the quotes)
> > in the body of a message (not the subject) to 
> > majordomo at lists.diy-efi.org
> > 
>
----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 



--- Bob Wooten
--- r71chevy at earthlink.net
--- 71-91 Camaro


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org