DIY ceramic coating

[Shirley, Mark R]

It works for me.  It's probably new enough it hasn't gotten to all the DNS
servers yet.

-----Original Message-----
From: John Dammeyer [mailto:johnd at autoartisans.com]
Sent: Monday, December 18, 2000 11:05 AM
To: diy_efi at diy-efi.org
Subject: Re: DIY ceramic coating


Jurgen,

That URL doesn't work for me.

John

----- Original Message -----
From: "Jurgen Hartwig" <jhartwig at midsouth.rr.com>
To: <diy_efi at diy-efi.org>
Sent: Monday, December 18, 2000 7:42 AM
Subject: Re: DIY ceramic coating


> > Now, I would like to find a DIY ceramic coating. Something that I can
> coat
> > the interior and exterior of an aluminum intake manifold and bake in a
> > conventional "kitchen" oven. I have seen the material on the net but no
> > where to buy it. Not in small quantities anyway. Anyone know where it
> can be
> > bought in small quantities?
>
> Wilk, for the ceramic coatings you can refer to
> http://www.techlinecoatings.com/.
>
> If you just have a single small part, have it sand blasted at low pressure
> and send it to me.  I have the setup to apply and bake the coatings on.
>
> If you do it yourself, you should be able to do a set of 4 pistons in
> about 2 hours or less.  This is the type of job where you should do all
> your parts at once.  To do an entire engine, you are looking at a full
> day.  Maybe the experts are faster.
>
> Hope this helps,
> Jay
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org