DIY ceramic coating

[Shirley, Mark R]

Ahh.  Broken routing.  Yes, technology is wonderfull... :(

-----Original Message-----
From: John Dammeyer [mailto:johnd at autoartisans.com]
Sent: Monday, December 18, 2000 3:15 PM
To: diy_efi at diy-efi.org
Subject: Re: DIY ceramic coating


Hmmm... Odd.  I try to ping the URL and my ISP has no trouble recognizing
that the URL is really 209.35.67.237 but the ping times out.  Isn't
technology wonderful?

John

----- Original Message -----
From: "Shirley, Mark R" <MarkRShirley at eaton.com>
To: <diy_efi at diy-efi.org>
Sent: Monday, December 18, 2000 11:30 AM
Subject: RE: DIY ceramic coating


> It works for me.  It's probably new enough it hasn't gotten to all the DNS
> servers yet.
>
> -----Original Message-----
> From: John Dammeyer [mailto:johnd at autoartisans.com]
> Sent: Monday, December 18, 2000 11:05 AM
> To: diy_efi at diy-efi.org
> Subject: Re: DIY ceramic coating
>
>
> Jurgen,
>
> That URL doesn't work for me.
>
> John
>
> ----- Original Message -----
> From: "Jurgen Hartwig" <jhartwig at midsouth.rr.com>
> To: <diy_efi at diy-efi.org>
> Sent: Monday, December 18, 2000 7:42 AM
> Subject: Re: DIY ceramic coating
>
>
> > > Now, I would like to find a DIY ceramic coating. Something that I can
> > coat
> > > the interior and exterior of an aluminum intake manifold and bake in a
> > > conventional "kitchen" oven. I have seen the material on the net but
no
> > > where to buy it. Not in small quantities anyway. Anyone know where it
> > can be
> > > bought in small quantities?
> >
> > Wilk, for the ceramic coatings you can refer to
> > http://www.techlinecoatings.com/.
> >
> > If you just have a single small part, have it sand blasted at low
pressure
> > and send it to me.  I have the setup to apply and bake the coatings on.
> >
> > If you do it yourself, you should be able to do a set of 4 pistons in
> > about 2 hours or less.  This is the type of job where you should do all
> > your parts at once.  To do an entire engine, you are looking at a full
> > day.  Maybe the experts are faster.
> >
> > Hope this helps,
> > Jay
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org