Alfa 33 16 Valves

[Diego Martin Monteverde]

Hi,

Do anyone know the entry points of the alfa 33 16 valves motronic EPROM?

Regards,

Martin
-----Mensaje original-----
De: DIY_EFI Digest <DIY_EFI-Digest-Owner at diy-efi.org>
Para: DIY_EFI-Digest at lists.diy-efi.org <DIY_EFI-Digest at lists.diy-efi.org>
Fecha: Jueves 20 de Enero de 2000 22:37
Asunto: DIY_EFI Digest V5 #33


>
>DIY_EFI Digest       Thursday, January 20 2000       Volume 05 : Number 033
>
>
>
>In this issue:
>
> 7730v2 ecu file
> re:Minimum to run GMECM?
> Re: re:Minimum to run GMECM?
> [admin] test diy_efi at esl 1
>
>See the end of the digest for information on subscribing to the
>DIY_EFI or DIY_EFI-Digest mailing lists.
>
>----------------------------------------------------------------------
>
>Date: Thu, 20 Jan 2000 14:47:17 -0700
>From: cwagner at info2000.net
>Subject: 7730v2 ecu file
>
>If anyone is interested, I uploaded a new ecu file to incoming.  The
>ecu file is for use with the 8D code (90-92 Corvett and Camaro).
>Let me know how it works.  It is specifically taylored for use with
>Winbin and Promedit 6.
>
>------------------------------
>
>Date: Thu, 20 Jan 2000 17:10:31 -0500
>From: "jtyler" <jtyler at ga.prestige.net>
>Subject: re:Minimum to run GMECM?
>
>>Date: Thu, 20 Jan 2000 10:07:27 -0500
>>From: "Bruce Plecan" <nacelp at bright.net>
>>Subject: Re: re:Minimum to run GMECM?
>
>>You want to run the system, in your own configuration, for what ever
>reason.  Your not going to like it when your done.
>>Look in the archives, for the dozen of so threads about deleting the >VSS.
The other inputs are all necessary, also.
>
>VSS controls (at least) :
>
>Idle air Control Valve. Manual Trans/manual clutch.  I only need one Idle
speed after warm up.
>
>Canister Purge.   Emissions are a non issue for this app.
>Torque Converter.  Manual trans....
>Cruise.   don't care it doesn't have one
>Trans shift solenoids.  manual trans....
>Electric cooling fans.  A simple temp controlled fan is fine.  The ECM
>   doesn't need to do this.
>
>Perhaps this application is just too basic for all that GM wizardry...
>sorry I bothered you with it.
>
>Jim
>
>------------------------------
>
>Date: Thu, 20 Jan 2000 17:27:08 -0500
>From: "Bruce Plecan" <nacelp at bright.net>
>Subject: Re: re:Minimum to run GMECM?
>
>THESE ARE ALL OUTPUTS!!!!.
>If you want to get/or seemingly pissy, fine, I'll withdraw my efforts to
>answer your questions.
>Grumpy
>
>| Canister Purge.   Emissions are a non issue for this app.
>| Torque Converter.  Manual trans....
>| Cruise.   don't care it doesn't have one
>| Trans shift solenoids.  manual trans....
>| Electric cooling fans.  A simple temp controlled fan is fine.  The ECM
>|    doesn't need to do this.
>| Perhaps this application is just too basic for all that GM wizardry...
>| sorry I bothered you with it.
>| Jim
>
>------------------------------
>
>Date: Thu, 20 Jan 2000 18:43:58 -0500
>From: jsg at jsgpc.mrcday.com
>Subject: [admin] test diy_efi at esl 1
>
>- -------------------------------------------------------------------------
---
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
>in the body of a message (not the subject) to majordomo at list.diy-efi.org
>
>------------------------------
>
>End of DIY_EFI Digest V5 #33
>****************************
>
>To subscribe to DIY_EFI-Digest, send the command:
>
>    subscribe diy_efi-digest
>
>in the body of a message to "Majordomo at lists.diy-efi.org".
>
>A non-digest (direct mail) version of this list is also available; to
>subscribe to that instead, replace "diy_efi-digest" in the command
> above with "diy_efi".
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org