Peak and hold vs. saturated injectors

[Anthony Buccellato]

> With an electromotive driver you will not have a snowball's chance where
> the sun don't shine of getting those injectors to idle. I believe that
if
> you read the emotive literature (if they give you anything meaningful)
that
> the minimum incremental change you can make to injector pw with their
ecu
> is 64 us. I suggest that before spending ANY more money, you run some
> calculations, and figure out what minimum % change in AF ratio you would
be
> making at idle!! (Even if the injectors would give repeatable flow at
the
> very short pw you will need. Pretty revealing!
> Greg

Good point. With large injectors pw resolution will be critical. Injector
size is non-negotiable, of course, gotta feed the HP. I'll calculate what
minimum pw will be needed, to effect AFR adjustment at idle.

- Clay

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org