Multi Coil Setups

Gavin gavston at sprockets.freeserve.co.uk
Sun Jun 25 17:22:12 GMT 2000


Is this to  the gorup, or to him personally?? If it's to him personally,
could you please post it to the ftp site.

Cheers

-Gavin


>Email with an attachment on it's way
>Grumpy
>
>
>> Hi Orin, are these smart coils you mention used on the LS1? I have a 1998
>> LS1 and need to understand the eight coils it has better. There are four
>> wires going to each of the eight coils.
>>
>> thanks,  dave
>>
>>
>> ----- Original Message -----
>> From: Orin <orin at diy-efi.org>
>> To: <diy_efi at diy-efi.org>
>> Sent: Wednesday, June 21, 2000 11:49 PM
>> Subject: Re: Multi Coil Setups
>>
>>
>> > > Check out the smart coils used on the late GMs, they have all the
>> > > electronics in them, and just need the fire signal. Orin posted about
>> the
>> > > "operation" of them.  They have an auto shut off.
>> >
>> > Yes, I'll dig out the info again...
>> >
>> > Leaving them armed isn't safe at very low RPM.  They will fire after
>> > 1/10 second of being armed whether you tell them to fire or not.
>> >
>> > As I recall, over 2.7V on the fire input arms them, then
>> > grounding it fires them.  Ie you don't need much more than
>> > an opto-isolator and a resistor to drive them.
>> >
>> > Orin.
>>
>> -------------------------------------------------------------------------
-
>> --
>> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
>> quotes)
>> > in the body of a message (not the subject) to
>majordomo at lists.diy-efi.org
>> >
>> >
>>
>> -------------------------------------------------------------------------
-
>--
>> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
>quotes)
>> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>>
>
>---------------------------------------------------------------------------
-
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list