727 J2 connector

[Dan Plaskett]

Ludis

Yes W body indeed.  Thanks for the tip.  Does that mean I don't need B11 at
all?  It runs directly to the ALDL now.

Dan Plaskett

----- Original Message -----
From: "Ludis Langens" <ludis at cruzers.com>
To: <diy_efi at diy-efi.org>
Sent: Sunday, June 25, 2000 3:16 AM
Subject: Re: 727 J2 connector


> Dan Plaskett wrote:
> >
> > Pulled a 727 out of a J body to use in my 61 Corvette TPI conversion.
> > Everything is going great except that connector b on the J body doesn't
use
> > pin 11 and I need it for serial data, so the ALDL will work properly.
>
> Just use pin B5.  B11 and B5 are wired together internally.
>
> Umm, wait a minute.  The J-body doesn't use a '727.  Do you mean you
> pulled it out of a W-body?
>
> --
> Ludis Langens                               ludis (at) cruzers (dot) com
> Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org