Electronic Transmission Control

[Carl Summers]

I don't remember the name of the company but there is a manual valve body
conversion available for the 4L80E and works pretty well for a hot
rod....Call Clovis Trans at 559-299-1973 and ask for Randy....he has one in
his blown 57....He is very helpful with options for these and has a
controller cheaper than what you listed....hth's
-Carl Summers

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of nacelp
Sent: Wednesday, March 08, 2000 8:43 AM
To: diy_efi at diy-efi.org
Subject: Re: Electronic Transmission Control



Ahh, way too much work, I'll gladly take it off your hands for shipping <g>.
Since, I doubt you'll do that, you might just look at a diesel pickups pcm,
and see what it needs.  Might consider that the dumber the controller the
harder the shifts.  Or tranny life becomes an issue, since you'll need to
have high line pressure shifting for it to live at WOT shifting.
  Just thinking out loud
Grumpy

> I've picked up a good 4L80E transmission out of a '94 pickup for use in a
> project that won't have EFI. Aftermarket vendors want from $900 to $2000
for
> a computer to control the transmission. Way too much.
>
> What would it take to make the EMC out of a similar vehicle and get it to
> ignore all but TPS and VSS so it can control the transmission?
>
> Any other suggestions?
>
> Gwyn Reedy
> Brandon, Florida
> mailto:mgr at mgrcorp.com
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org