DIY_EFI Digest V5 #109

[dzorde at erggroup.com]

Hi Mike,

Friend of mine just had a turbo from an EVO II motor rebuilt for his Starion
(the nut cam of the front shaft).  With a new compressor wheel it cost him $600
from memory (the new compressor wheel alone was $400).

Marlows Joondalup has the colour tunes ex-stk for around $40.  They also have a
CO/NOX gas analyser (haven't had a really good look at it) for around $300 (a UK
brand I think).

Dan  dzorde at erggroup.com


<From: "Mike (Perth, Western Australia)" <erazmus at wantree.com.au>
<Subject: Re: turbocharger repair - ripped off!
<
<Blimey in Perth we are being ripped off big time. To replace bearings
<and balance on the latest "VST" dynamic balancer is around A$800 *and*
<on a 'care but no responsibility' clause. They say their balancers cost
<around A$35,000 each (blah) (blah), to change T3 wheels to T4 wheels
<and machine the housings is around A$1300  !!




----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org