adjusting fuel pressure on TBI - Various Options

[Robert W. Hughes]

> 4) You can add vac compensation to any TBI regulator, if you have the =
> time and patience to get creative.  Basically,  you just need to make =
> the can assembly that surrounds the backside of the diaphragm "sealed", =
> and then plumb it to manifold vacuum.  You can either do this thru =
> sealing/welding shut the existing can, or machining a new can.  The shop =
> manual tells you not to disassemble these regulators, but in truth they =
> are quite easy to dis/re assemble if you are careful. =20

And if you do damage the diaphragm, you can buy a kit just like a
carburetor kit which will have a new one in it.

-- 
Robert W. Hughes (Bob)
BackYard Engineering
29:40.237N, 95:28.726W
Houston, Texas "The city with too much Oxygen"
rwhughe at ev1.net
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org