Source for small throttle bodies?

[Christian J. Knudstrup]

Clay
You might want to try the Neon Throttle Bodies.  They are 56mm for the
Automatics and 52mm for the manual trans. I don't know what the conversion
is though to Inches.

Christian

see us at our website
http://ChrisnElida.Knudstrup.net/
http://ThunderRacing.Knudstrup.net/

----- Original Message -----
From: "Clay B" <clayb at sonic.net>
To: <diy_efi at diy-efi.org>
Sent: Thursday, October 26, 2000 7:43 PM
Subject: Source for small throttle bodies?


> Any suggestions on small throttle bodies? Inlet size needs to be 2" ID, 2
> 1/4" OD. I'd prefer a flat, bolt on flange on the outlet side. I checked
> the '90 mustang throttles, but the outlet flange is huge. Compact size is
> a must, for my application, I'm afraid.
>
> Has anyone noticed any 4 cylinder cars with throttles that appear to fit
> this description? I'd really prefer to avoid the custom parts route. Much
> better to use a factory part, if one that fits is available.
>
> I'll be making a trip to the local salvage yard, but it wouldn't hurt to
> have some target donor cars in mind.
>
> - Clay
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org