Lucas injectors

[Walter Sherwin]

Those injectors are indeed from the Saturn 1.9L DOHC.  The coil is low
impedance @ 2.05 ohms.  They flow about 17.4 #/Hr @ about 43.5 psig
differential pressure.  They later change-up to service part number
17109718........



> Well, the Saturn TwinCam engine I got the throttle-body off of, I also got
> the injectors and fuel rail. Also all the sensors (knock, temp, oil press,
> crank-trigger). The injectors appear to be Lucas-style, stylized "R"
> (rochester) on the side of the connector boss, plastic and aluminum shell,
> stainless internals (what I can see). Marked " 9122    17106488" . They
each
> have 6 orifices on the nozzle end. The Fuel-rail is an Aluminum extrusion,
> marked " AC    ROCHESTER  USA         21006548    2652  1R".  I know that
> doesn't really help anything. But, anybody have any idea what the
injectors
> flow? Just curious.
>


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org