EFI POW WOW

[Bruce Plecan]

It's a show and tell, type deal.
Dunno of anyone promising anything,  I posted what I have that will be there
(maybe one item is missing <g>).
Bruce



> Anyone expected to have an early version of EGOR (sp) or similiar there?
> Expecting anyone with Bosch Motronic experience?  Most of the activities
(ie.
> software,code) on this list are way over my head.  I adapted the FI system
from
> a 2L GME engine onto a (formerly) carb'ed 2.3L Isuzu Amigo.  Only change
in
> parameters was a 1300 ohm resistor on the water temp sending unit to
richen
> things up a bit.  While it funtions reasonably well, I'm certain there is
room
> for improvement - and would love to get suggestions from others more
> experienced.
>
> I have considered doing a long day (down and back, I'm in metro Detroit)
on
> Saturday with the Amigo.
>
>
>
>
>
>
>
> The puller will not be here.  Couple other trick items are no shows too.
> But, there is one surprise.
> If you have no idea of what a GN is, the Black Car will be here (might be
> apart, doing something, but it will be here.
> The ecm bench will be up.
> I have various bits of software, running, and you can run various editors.
>
> There is No Baby sitting, and I Can't be around young folks ie under 14.
> Their immune systems are just so healthy they can carry all sorts of
stuff,
> and with very little of an immune system they are flat out dangerous to
me.
> Also, I'll be wearing a mask, but if any has any cold symtoms, I ask that
> you ask for one and wear it.   This looks to be a rather small gathering
so
> will just be in the house.   No smoking in CSH, HQ.
>
>
>
>
>
>
>
>
>
>
>
>
>
>       CONFIDENTIALITY NOTE:  This message contains information which may
be
>       privileged or confidential, or exempt from disclosure under
applicable
>       law.  If the reader of this message is not the intended recipient,
or the
>       employee or agent responsible for delivering the message to the
intended
>       recipient, you are hereby NOTIFIED that any dissemination,
distribution,
>       retention, archiving, or copying of this communication is strictly
>       prohibited.  If you have received this e-mail in error, please
notify us
>       immediately by calling our office at (905) 669-2888 or by return
e-mail at
>       info at decoma.com, Attention:  General Counsel.
>
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org