Adding a resistor to raise injector impedance - Comments?

[Ron Schroeder]

At 09:18 AM 4/10/01 -0600, you wrote:
<snip>
>	Some of us use additional injector drivers.  Up until about a couple
>of months ago, the Cherry CS452, and CS453 were available.  Now they're out
>of production.  The only alternative so far is to use the LM1949 and all the
>associated external parts.  The MC3484S2-1 and the CS452 were nice because
>all of this was inside one neat little package.
>
>	If anybody else knows of any other Peak-and-Hold drivers. Please let
>us know........Tim.  


I have been using the Burr-Brown DRV101 on a home-brew 24 volt efi.
Unfortunatly it has only a 2.3A current limit.

Ron Schroeder
WD8CDH
E. E. S.
wd8cdh at bnl.gov
rjs at bnl.gov
ron at 112motors.com
631 344-4561 Day
631 286-5677 Nite
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org