DIY_EFI Digest V5 #584 - hybrid cfi

[Shannen Durphey]

55-60 psi system.  8 cylinder versions are sequential pfi, the earlier 6 cyl
versions are batch fire... so to speak.
Shannen


James Montebello wrote:
> 
> Interesting.  Must have been either a relatively low pressure system, or
> a hefty injector to handle the 100+ PSI usually used by constant flow
> systems (like K-Jet).
> 
> james montebello
> 
> On Tue, 24 Apr 2001, Clare Snyder wrote:
> 
> >
> >
> > GM has already done it. The cfi they used on some early '90s pickups (may still
> > be using) has what is basically a throttle body injector feeding what is
> > basically a spider of KJet injectors. The injector is PWMd to provide a varying
> > constant flow (pulsed? but sure not timed} through all injectors
> >
> > ----------------------------------------------------------------------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
> >
> 
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org