EGOR HOW

[Frank]

I would like to be part of a group buy for parts, boards or whatever. If
anyone has the latest info on building the EGOR please send to me. I would
like to know the best construction method.(maybe wire wrap?) Any tips or
whatever?
Thanks for your time.
Frank Pearson
repair at frontiernet.net

----- Original Message -----
From: "Bruce Plecan" <nacelp at bright.net>
To: <diy_efi at diy-efi.org>
Sent: Wednesday, February 14, 2001 10:55 AM
Subject: Re: EGOR


>
> Got one right here.
> One of the prototype, first 3.
> Ran it in parrarel, with a NTK WB and was at least as good.
> The Bare unit is very fast responding.  Using a scope actually gave the
best
> results for steady state viewing.   I'm using a slow sample rate DVM for
in
> car work.   Was easy to see the individual cyl firings at 3K rpm..   It
also
> was real close to the commanded AFR the ecm was seeking, in my GN (under
> boost even <g>).
>
> There is an update (to the wiring), and continuning work on it.   Thou at
> this time, just limited to 2 people.
> No boards yet.
> As I recall, paying premium prices for all the bits was $35.
>
>
> > Has any one built this wide band EGOR unit and has any feedback to how
> well
> > it works?
> > What do you estimate the total cost of parts would be to build it?
> > Did you build all in house or did you send out some of it to be
> fabricated:
> > the board, etching, etc.
> > Thanks.
> > Steve
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org