MAP sensors

[Axel Rietschin]

From: <rrauscher at nni.com>
> Wow, now thats diy! I don't know the bar equiv, however in
> KPa map sensors/ecm code typically ranges from 20 Kpa to
> 104 Kpa or so. The 104 top end is used for baro detection. 

20KPa  == 200mbar.

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org