MAP range

[John Dammeyer]

A standard 0 to 15PSA absolute transducer will work but if you expect to
Turbo then go for 0 to 30SI absolute.

John Dammeyer


----- Original Message -----
From: "Mike Blakey" <mike.blakey at baesystems.com>
To: <DIY_EFI at lists.diy-efi.org>
Sent: Monday, January 15, 2001 5:55 AM
Subject: MAP range


> What range (in psi absolute) can I expect from the manifold vac?
>
> I have a sensor who's range is 0 to 15 psi, but I wouldn't expect to get
0psi
> (absolute vac) and no more than 14.5 psi at sea level.
>
> Does anyone have experience of this?
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org