PCB software
Roy
spectric at yahoo.com
Thu Jan 25 12:27:37 GMT 2001
Hi all
With regards to PCB software, I use a package from a
UK company called sightmagic who produce a product
called EasyPc. This program allows nyou to easily add
to the library and has an autorouter. I do all my
work using it and have no real issues. Support is
also good.
Roy Spectric's Lts
--- DIY_EFI Digest <DIY_EFI-Digest-Owner at diy-efi.org>
wrote:
>
> DIY_EFI Digest Saturday, January 20 2001
> Volume 05 : Number 453
>
>
>
> In this issue:
>
> PCB Design software.
> Re: PCB Design software.
> RE: PCB Design software.
> Re: off topic / traction control
> CS-452/3
> Re: PCB Design software.
> Hello, I'm new....
> DIS Driver
> "Coldstart Switch" switch does on a Motronic ML1.2
> Decelleration Fuel Cut
> Re: "Coldstart Switch" switch does on a Motronic
> ML1.2
> Re: Decelleration Fuel Cut
> Re: "Coldstart Switch" switch does on a Motronic
> ML1.2
> New to List
>
> See the end of the digest for information on
> subscribing to the
> DIY_EFI or DIY_EFI-Digest mailing lists.
>
>
----------------------------------------------------------------------
>
> Date: Fri, 19 Jan 2001 09:13:00 +0000
> From: Mike Blakey <mike.blakey at baesystems.com>
> Subject: PCB Design software.
>
> I'm designing a DIS for use on my MG, The software
> packages I've used to date are
> Multisim/Ultiboard, which has a lot of limitations,
> a poor autorouter and not a
> very good library. I have also used Quickroute which
> is a really shit piece of
> software, It constantly crashes and you get NO
> support the manufactures.
>
> My budget is very limited, Does anyone have some
> experiences of GOOD software, the
> sort of stuff that actually does what is says on the
> box!!
>
> Thanks.
> -
>
----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe
> diy_efi" (without the quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
> ------------------------------
>
> Date: Fri, 19 Jan 2001 21:07:08 +0800 (WST)
> From: Bernd Felsche <bernie at innovative.iinet.net.au>
> Subject: Re: PCB Design software.
>
> Mike Blakey tapped away at the keyboard with:
>
> > I'm designing a DIS for use on my MG, The software
> packages I've
> > used to date are Multisim/Ultiboard, which has a
> lot of
> > limitations, a poor autorouter and not a very good
> library. I have
> > also used Quickroute which is a really shit piece
> of software, It
> > constantly crashes and you get NO support the
> manufactures.
> >
> > My budget is very limited, Does anyone have some
> experiences of
> > GOOD software, the sort of stuff that actually
> does what is says
> > on the box!!
>
> Take a look at Eagle from http://www.cadsoft.de
> Works well under Linux. There's a WinXX port.
>
> The downloadable light version is free for
> non-commercial use.
> Free version is restricted to smallish, double-sided
> PCBs.
>
> - --
> /"\ Bernd Felsche - Innovative Reckoning, Perth,
> Western Australia
> \ / ASCII ribbon campaign | I'm a .signature
> virus! |
> X against HTML mail | Copy me into your
> ~/.signature|
> / \ and postings | to help me spread!
> |
> -
>
----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe
> diy_efi" (without the quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
> ------------------------------
>
> Date: 19 Jan 2001 06:50:58 -0800
> From: "Eric Aos" <eoa at spartek.com>
> Subject: RE: PCB Design software.
>
> Get Protel 99 SE. It's free for 30 days, then really
> expensive... If you get
> it let me know. I've been using it for a while and
> might be able to answer
> some questions...
> http://www.protel.com/
>
> Eric
>
> > -----Original Message-----
> > From: Mike Blakey
> [mailto:mike.blakey at baesystems.com]
> > Sent: Friday, January 19, 2001 1:13 AM
> > To: DIY_EFI at lists.diy-efi.org;
> efi332 at lists.diy-efi.org
> > Subject: PCB Design software.
> >
> >
> > I'm designing a DIS for use on my MG, The software
> packages
> > I've used to date are
> > Multisim/Ultiboard, which has a lot of
> limitations, a poor
> > autorouter and not a
> > very good library. I have also used Quickroute
> which is a
> > really shit piece of
> > software, It constantly crashes and you get NO
> support the
> > manufactures.
> >
> > My budget is very limited, Does anyone have some
> experiences
> > of GOOD software, the
> > sort of stuff that actually does what is says on
> the box!!
> >
> > Thanks.
> >
>
--------------------------------------------------------------
> > --------------
> > To unsubscribe from diy_efi, send "unsubscribe
> diy_efi"
> > (without the quotes)
> > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> >
>
> -
>
----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe
> diy_efi" (without the quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
> ------------------------------
>
> Date: Fri, 19 Jan 2001 08:14:26 -0700
> From: "Programmer" <nwester at eidnet.org>
> Subject: Re: off topic / traction control
>
> Thanks Ludis !! Was beginning to think noone talks
> to me anymore <g>...
>
> Lyndon.
> - ----- Original Message -----
> From: Ludis Langens <ludis at cruzers.com>
> To: <diy_efi at diy-efi.org>
> Sent: Friday, January 19, 2001 12:59 AM
> Subject: Re: off topic / traction control
>
>
> > Programmer wrote:
> > >
> > > Happen to have a list of the "plug and plays" ??
> > >
> > > >Some of the stuff is really amazin for the plug
> and plays
> > > >165s to 747s can be just a couple wires off.
> > > >the late caprice is a P+P with a 747
> > > >Couple other TBIs too.
> > > >Bruce
> >
> > The 24+32 pin C3 dual injector TBI ECMs should all
> be plug and pray,
> > except perhaps for some accessories.
> >
> > The single injector 24+32 pin C3's should also be
> identical in their
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices.
http://auctions.yahoo.com/
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
More information about the Diy_efi
mailing list