Need help with SBC conversion

[road runner]

Where's the board at? Is there aftermarket injectors
out there for a more performance application. I'd like
some 24lb/hour injectors if I can find em but I can
make do with 22's.

I tracked down a complete set-up for $500. It's for a
305 but does that sound like a decent price or should
I keep lookin?

--- Rob O <rjo1 at home.com> wrote:
> The plenum, base and runners are the same for the
> 305s and 350s.
> Injectors swap easily, make sure you have the
> correct chip for the
> injectors you are using
> 
> Check out the TPI section of the third gen camaro
> board for a lot more
> information on that system
> 
> Rob_O
> 
> road runner wrote:
> > 
> > I'm converting my SBC to TPI. I have a couple
> > questions before I buy one though. I found an '86
> but
> > it's for a 305 and I got a 350. Seems like the 305
> is
> > all I can find. Now I know the fuel injectors on
> the
> > 305 are like 19psi and the 350 is 22.
> > 
> > Can I replace the 19psi injectors with 22's?
> > 
> > I could really use some help if anyone knows
> Chevy's.
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Auctions - Buy the things you want at great
> prices.
> > http://auctions.yahoo.com/
> >
>
----------------------------------------------------------------------------
> > To unsubscribe from diy_efi, send "unsubscribe
> diy_efi" (without the quotes)
> > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
>
----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe
> diy_efi" (without the quotes)
> in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices. 
http://auctions.yahoo.com/
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org