NC 'custom' LED lights retrofitted?

[Pat Ford]

 To make matters worse the leds current requirements are temp dependent.

Previously, you (don.broadus at exeloncorp.com) wrote:
{ it is going to be very hard to get cost in line on even on a group buy. The
{ best thing to do is get a bunch of third brake light bars from the junk yard
{ and use the high brightness leds off of these. Most red Leds have a view
{ angle of only 15 degrees or so. The new white Leds have a view angle of 135
{ degrees but are $2 each.  You can bust out the glass of the old 1157 bulb
{ and group 3 leds for 
{ running and 3 for brake light. The current limiting resistors control the
{ brightness
{  
{ 


--
Pat Ford                           email: pford at qnx.com
QNX Software Systems, Ltd.           WWW: http://www.qnx.com
(613) 591-0931      (voice)         mail: 175 Terence Matthews          
(613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M 1W8

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org