NTK UEGO

[Bruce Plecan]

There are a bunch of threads from about 2 years ago that realy covered the
NTK sensors.
Look under EGOR, lots of stuff there
Bruce



----- Original Message -----
From: "Robert R Ducker" <bducker at txdirect.net>
To: <diy_efi at diy-efi.org>
Cc: "Stewart Prince" <sprince at csun.edu>
Sent: Wednesday, January 31, 2001 2:51 PM
Subject: Re: NTK UEGO


> Stewart,
> I'd appreciate a copy of that data.
> Although, according to TAG (yeah, the F1 ones) their NGK sensors come from
> Japan with outputs that vary +-15% away from stoich. Check out their
fairly
> extensive specs under "lambda sensor" here:
> http://www.tagelectronics.co.uk/ . Their sensor looks to be a little
> different with fewer tip holes, but maybe that's just a flavor available
> for users who don't intend to do alot of idling...
> Bob D
>
> At 09:16 AM 1/31/01 -0800, you wrote:
> >Not sure if this will help, but we bought an NTK uego directly from NGK
about
> >two years ago. The sensor was 600, the controller 400, and the harness
60.
>  You
> >might be able to get one directly from them.  I've got all the specs on
it,
> >including the air fuel ratio vs output voltage, calibrated from a horiba.
If
> >anyone is interested, I'll scan an send as an attachment.
> >s. prince
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org