NTK, WBO2 resistor

[Bob Wooten]

Richard,

you know it made complete sense to me until you said something & then I had
to page down to read what I had written.  I am surprised that I did not get
a "what you do in the privacy of your own garage is up to you, but you don't
have to share it with the rest of us" email.  your right, I did get a
giggle.

BW

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of Richard Wakeling
Sent: Wednesday, February 28, 2001 2:22 AM
To: diy_efi at diy-efi.org
Subject: Re: NTK, WBO2 resistor


Good thin'in' Bob.

    I am not going to talk about my but, but my resistor measured 11.87K and
my
heater is 3.3 ohms. Hope you can get a giggle out that.

Cheers Richard

Bob Wooten wrote:

> Finally got my but out to the garage last night & measured the resistor in
> mine.  it was 6.16K.  it appears that for the few that I have seen that
they
> are in the 5K to 7K range.  I thought it interesting how it came apart &
the
> little plug in Res module in it.
>
> if yall want to take yours apart & email me with the values I will put
them
> into a file. for giggles more than anything I suppose.  I am going to see
if
> I cant come up with a print for the CPU, well see where that takes me.  if
> interested also shoot me the writing on the resistor, mine was M89 (or
68W)
> as a reference.
>
> my guess, this is an offset thing.  maybe the heater values are enough
> different, that they are using them for a standard on the heater so fixed
> value resistors can be used for feedback resistors.  the print will tell.
> maybe I ought to ask for the heater resistances as well, though if they
are
> not all @ the same ambient temp, this is no good as the resistance value
is
> different @ different temps (as the research has shown).
>
> just thin'in'
>
> Bob Wooten
> r71chevy at earthlink.net
> www.r71camaro.homestead.com
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org