CNP coils

[Bob Wooten]

thank you amigo, this is a great help.

Bob Wooten


-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of Ira Emus
Sent: Wednesday, March 07, 2001 12:15 AM
To: diy_efi at diy-efi.org
Subject: RE: CNP coils


At 02:42 AM 3/7/01 -0500, you wrote:
> >Bob, sorry I don't have the info about the pin identification.
> > Hopefully, someone can assist.

My 2000 Camaro shop manual shows the coil connections are:

A - Ground
B - Reference low  (seems to be ground in the PCM, probably ground return
for the "Control signal")
C - Control signal
D - 12V with ignition on.

The manual indicates that the coil is fired by grounding pin C.

I hope that helps.

Ira

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org