Newbie...

[Rob O]

Check out www.tmo.com, Buschur has no clue on disassembling code and
will tell you that in his Northern Ohio way 

ROb_O

lance wrote:
> 
> Rumor has it the DSM guys have completely disassembled their code and they
> have a guy who has written some interesting mods (2 stage rev limiter to
> build boost at the line, etc).  I'd contact Dave Buschur The4Bangr at aol.com
> and ask about DSMs.  He just recently joined the Toyota Supra Owner's group
> and has been very open about his findings even though he is a well known
> competitor in Import Drag racing.  Good luck!
> 
> Lance
> 
> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of steve ravet
> Sent: Thursday, March 08, 2001 10:19 AM
> To: diy_efi at diy-efi.org
> Subject: Re: Newbie...
> 
> Chris, it seems like there's a ton of information for GM cars, somewhat
> less for Fords, and basically none for anything else.  So it might be
> hard to find out about your Eclipse.  But, you can look around at the
> gmecm page and learn a lot about GM EFI strategy.  Another great place
> is the archives of both diy-efi and gmecm.  Both archives can be
> downloaded from their respective WWW pages, and searched with a text
> editor or word processor.  I wouldn't try reading from end to end, but
> browse around in them and read stuff that looks interesting.  There
> isn't a good place to start, that I know of at least, other than read a
> lot and ask questions.  Good luck!
> 
> --steve
> 
> > Chris Remshaw wrote:
> >
> > Hi all,
> >   I have read this digest off and on for the past two years, and I
> > have only begun to understand any of it.  I am a computer programmer,
> > but a more internet-based one, and I would love to get more into
> > programming ECU's.  Where is a good place to start (on the web, off
> > the web, etc.)?  I'm knowledgable on the basics of cars and have done
> > modifications to my own.  I have a '91 Mitsubishi Eclipse GS.
> >
> > Thanks,
> > Chris Remshaw
> 
> --
> Steve Ravet
> steve.ravet at arm.com
> ARM,Inc.
> www.arm.com
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org