DIY_EFI Digest V5 #525

[Bruce Plecan]

Considered yes, done no,  just the tiniest of grit can hold an injector
open.  Something I'd rather not risk.  Even with the stainless, there is no
way that I know of that cut it perfectly.    If you can hear the injectors,
your exhuast system is too quiet, <g>...
Bruce


> Has anyone considered putting a piece of open cell
> foam (like inside a fuel cell) or maybe a metal or
> plastic mesh inside one of these rails? The idea being
> to dampen the acoustic characteristics without
> impeding the flow.

> I'd favor a piece of coarse stainless mesh, rolled up
> into a cylinder, and inserted into the passage. The
> foam makes me uncomfortable for the long haul.

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org