Wide Band Oxygen Sensor - Request For Comments(Updated June 14 2000)

[Neil Emiro]

Hello All-
		I was wondering if anything came of this below email.  The listed 
site is down, and I have not heard anything about the widebad O2 
project since.  Anyone?


Hi guys

Please check out my new Wide Band Oxygen Sensor Project page
http://www.vb.co.za.
any comments corrections will be appreciated.

Just Updated June 14 2000

This project is to build a Wide Band Oxygen Sensor using the 
Honda/NTK
five wire sensor. The sensor will produce a 5V linear output 
dependant on
AFR at an accuracy of 0.2+- AFR. from 11:1 to 22:1. Thats serious 
kick ass
performance for those of you with standard 2-wire and 4-wire sensors.

Note these sensors only cost $100, compared this with exisiting
manufacturers equipment that make use
of the same sensors starting at $1,000. The circuit required to make 
these
sensors work with exisiting ECU's consists of a few opamps and regulated
power supply.

I'm looking for people to get involved in the design and building of
prototypes.

My commitment is to produce a working circuit within 8 weeks.

Also any further information,ideas etc which will aid us in this objective
will be much appreciated.

Still haven't managed to get my hands on any SAE papers relating to this
project:(

THIS IS A HOBBYISTS, NON PROFIT PROJECT, YOU WANT TO MAKE MONEY, GO ROB A
BANK. I'M DOING THIS FOR FUN !

Paul
paul at vb.co.za

--------------------------------------------------------------------------
-- To unsubscribe from efi332, send "unsubscribe efi332" (without the
quotes) in the body of a message (not the subject) to
majordomo at lists.diy-efi.org

Neil Emiro
ND Performance
1986 Shelby GLHS #053 (VNT/Intercooled/A568)
1988 Shelby CSX-ND (CSX-T #236/16v/DOHC/Intercooled)
1991 Ford Mustang LX 5.0 (Supercharged/Intercooled)
1991 Dodge Spirit R/T (16v/DOHC/Intercooled) 
1996 Dodge Indy Ram Pickup (5.9l/Auto/3.92's 'ND RAM')
2000 Dodge Neon ES
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org