98 Dodge Dakota PCM Hack?

[Programmer]

I know a couple guys have put larger injectors, running boost--and just live
with the low
speed driveability. I really think there's potential to run a PWM signal to
the fuel pump to make
low speed ok...

Lyndon.
----- Original Message -----
From: John Walker <dakotart98 at hotmail.com>
To: <diy_efi at diy-efi.org>
Sent: Wednesday, March 21, 2001 5:33 PM
Subject: Re: 98 Dodge Dakota PCM Hack?


> Yeah...that's all I've seen too.  I'm having some troubles with the MAP
> sensor under boost.  It would be nice to reprogram the computer and add a
> 3bar MAP sensor.  Thanks for the help!
>
> -John
>
>
> >From: "Programmer" <nwester at eidnet.org>
> >Reply-To: diy_efi at diy-efi.org
> >To: <diy_efi at diy-efi.org>
> >Subject: Re: 98 Dodge Dakota PCM Hack?
> >Date: Tue, 20 Mar 2001 21:13:42 -0700
> >
> >As yet, the only thing I've found is an add on spark/fuel computer. As
far
> >as I 'know',
> >nobody has these things hacked, other than Chrysler. Everyone else is
> >either
> >fooling
> >a CTS, TPS, or MAP <g>...
> >
> >Lyndon.
> >----- Original Message -----
> >From: John Walker <dakotart98 at hotmail.com>
> >To: <diy_efi at diy-efi.org>
> >Sent: Wednesday, March 21, 2001 3:21 AM
> >Subject: 98 Dodge Dakota PCM Hack?
> >
> >
> > > Has anyone tried to alter the fuel/spark maps, shift points, and other
> > > parameters of a 98 Dodge Dakota or similar PCM?  I'd like to
understand
> >the
> > > operations of the Chrysler PCM (Dodge Dakota inparticular) in detail.
I
> > > know the processor type, but am not sure where to start with reading
and
> > > ultimately change the EEPROM.  I know it's something not to be taken
> > > lightly...but I'm not get the desired tuning I want from outside
> >vendors.
> > > Any suggestions?
> > >
> > > Thanks,
> > >
> > > John Walker - Antioch, TN
> > > http://www.fracus.net/~mopar
> > > 98 Dakota R/T IB CC - Best ET 13.386 at 104.90 2.110 60ft.
> > >    Golden West/ATI 7-10psi * Leach Headers w/3" Collector
> > >    Dynomax Ultra-Flow * Magnum Performance TB * Hotchkis
> > >    Added for 2001:
> > >    M1 * MSD 6BTM/Blaster 3 * Viper Converter * E/T Streets
> > >
> > > _________________________________________________________________
> > > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> > >
>
>--------------------------------------------------------------------------
> >--
> > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> > > in the body of a message (not the subject) to
> >majordomo at lists.diy-efi.org
> > >
> >
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org