WB Display (was: Which WB O2 is Best??)

[Greg Hermann]

At 12:14 PM 11/9/01, Peter Gargano wrote:
>Glenn & Debbie Woodhouse wrote:
>>
>> Peter,
>>
>> What will be the update rate of the KC-5300 based display units you are
>> working on?Thanks, Glenn.
>
>The bar graph updates each 220 mSec, and the AFR (or Lambda
>if that option is selected) displays at half that rate, or 440
>mSec.
>
>The software is ready now, so if you're one of the many who
>purchased a KC5300 from one of the commercial kit suppliers,
>and you want the modified software, then you need to contact
>me mailto:peter at techedge.com.au and I'll freely send you a HEX
>file that you can use to re-program the 16F84A (it's a flash
>device and you can make a DIY programer for almost no cost).
>
>I won't be making the source code available until the DIY-WB
>EULA is clarified to remove the suggestion that any artistic
>work related to the DIY-WB becomes the property of anyone other
>than the author of that work.
>
>Peter.

Peedy forgot to remind you to be _SURE_ to run a very careful virus check
on anything and everything he sends you !!

Greg


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org