DIY_EFI Digest V5 #879

[Bruce Bowling]

My error on the part numbers - the MPX4100 is *almost* the same thing as 
the MPX4115, but an older part with a slightly different range, and it is 
harder to acquire.

The MAP sensors, full part numbers, are MPX4115AP (115 KPa) and MPX4250AP 
(250 KPa) - the "A" means absolute pressure and the "P" means a barbed port.

Sorry for the MAP number confusion - my typing fingers are not the best at 
times.

- Bruce


>Date: Tue, 13 Nov 2001 08:35:54 -0500
>From: Ron Schroeder <rjs at bnl.gov>
>Subject: Re: MegaSquirt
>
>At 08:12 AM 11/10/01 -0500, you wrote:
><snip>
> >Second, there are two MAP sensors available from Mot, the MPX4115 (115 KPa)
> >and the MPX4150 (250 KPa).
>
>Hi Bruce,
>
>What are the full part numbers of the included MAP sensors choices
>(including suffix)?
>
>The group buy sign-up sheet shows MPX4100 and MPX4250 not MPX4115 or MPX4150.
>
>
>Actually, I hope it is the MPX4115AP since that would allow me to run a
>very low pressure boost for altitude compensation.
>
>Thanks
>
>
>
>Ron Schroeder
>WD8CDH
>E. E. S.
>wd8cdh at bnl.gov
>rjs at bnl.gov
>ron at 112motors.com
>631 344-4561 Day
>631 286-5677 Nite

- Bruce

---------------------------------------------
              Bruce A. Bowling
          bbowling at earthlink.net
    http://home.earthlink.net/~bbowling
---------------------------------------------
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org