Seeking a little advice on EFI project

[Sam Weatherby]

I am putting a 400 into a '65 f100.
initially I am using a Tb from a "CFI" 5.0 HO. This has 20 ~50 lb\hr
injectors and will be fine for awhile.

Later I plan to upgrade to something like a carb spacer, only with
provisions for some injectors.
Then have an adapter off of that to mount 1 or 2 stock TB's from the
junkyard. (Cheaper than a big aftermarket one...)

You could probably do something like this two.
                                        -srw


----- Original Message -----
From: "Tomas J. Sokorai Sch." <tsokorai at xperts.cl>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, November 27, 2001 1:59 PM
Subject: Seeking a little advice on EFI project


> problems I'm thinking of:
> What kind of TBI should I get for my engine (or maybe I can destroy the
carb
> to fit 2 injectors and a TPS sensor!?!?.....). I want to keep the vacuum
> advance, so I'll need ported vacuum.


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org